Bidding on this auction has not started.
Please register now so you are approved to bid when auction starts.
This auction is open!
It is now possible to bid at this auction.
This auction is closed!
It is no longer possible to bid at this auction.
You are registered for this auction
You are now approved to bid at this auction.
Your auction registration is now pending
You have successfully registered for this auction, pending approval to bid. Please check your email for further information.
Your auction registration has been declined
Please contact the auctioneer for more information.
Catalogue
Venue address
Various Locations Mainly Throughout The UK
,
United Kingdom
Used Cereal Processing Equipment (UCPE) - all equipment subject to availability
Equipment Available For Sale by Private Negotiation. For further information please email ucpe@sw.co.uk
Auction dates
Jun 29, 2022 02:00 PM BST
|
Auction currency
|
GBP |
|
Buyer's premium
|
0 % |
|
Sales tax
|
20 % |
|
Accepted cards for registration
|
|
|
Accepted cards for payment
|
We found 52 items matching your search
Refine results
Filter by
Primary Category
Category
Brand
Item Type
Country
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
3603
Tank - Rectangular Molasses Tank, 3.0 metres x 2.6 metres x 2.9 metres high with inlets, outlets, access ports etc. Working volume about 22 cubic metres (UCPE 3603) Price - £950 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
4509
Picking Table - Tickhill Engineering Conveyor (probably for vegetable sorting or washing), It is 9.0 metres long and has a 900 mm wide plastic mesh belt with cleats. Not in good order (UCPE 4509) Price - £750 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
4548
Hydraulic Powerpack - Vickers Hydraulic Powerpack, with 7.5kW pump. This unit is on casters, has an oil bund and 8 No spool valves. The pump is a model PVE19RW which will deliver 19 litres per minute (UCPE 4548) Price - £1,750 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
U Trough Screw - Texpan U Trough Screw Conveyor, 600mm dia. x 3.7 metres long with contrawound flight to a central outlet. This conveyor can shuttle from side to side in a framework with rails, a drive motor and limit switches. The framework is 6.6 metres long x 1.4 metres (UCPE 4605) Price - £2,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
4608
Levelling Screw - Purpose Made 400mm dia. Levelling Screw, 2.65 metres long mostly in stainless steel. The conveyor has an open base, a top mounted drive and a centrally mounted inlet hopper. The flighting is contra wound to move the product in two directions from the central filling hopper (UCPE 4608) Price - £1,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Brush Sifter - KEK Type 800 Brush Sifter, in stainless steel. It has 300 mm dia. x 800 mm long mesh cylinder and a 4 kW motor. (2 remaining) (UCPE 4941) Price - £4,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
4992
Pellet Press - Swiss Combi 4/4K Pelleting Press, with what looks like a 160kW drive, no plate. The press has a force feeder, a set of four rolls and a 7 mm die which I am told was refurbished and has done almost no work. The press was set up to pellet straw dust. There is a starter panel with the press but it does not have an ammeter. There are no spares (UCPE 4992) Price - £12,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
5307
Rotary Drum Dryer - Swiss Combi MK 5 Triple Pass Rotary Drum Dryer, probably mid 70s vintage but been refurbished in recent years. The drum is about 2.5 metres dia. x 10.0 metres long and has riding rings, support rollers and friction drive. The natural gas burner reference UCPE-5306 or the Energy Unlimited biomass burner reference UCPE-5239 could be used on this drum. With the drum there is a process air fan, ducting, cyclone with bottom section cut off, cyclone stand and stone trap, Control panel is included but no rotary valve (UCPE 5307) Price - £30,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
5322
Tank - Stainless Steel Jacketed Bowl, 1150 mm dia. x 825 mm deep with support legs, top cover and lid. The overall height with legs is 1575 mm giving 680 mm below the 50 mm dia. flanged outlet. Working volume about 350 litres. Made by Foodmex Ltd (UCPE 5322) Price - £1,500 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
5400
Twin Screw Press - Rosedowns Twin Screw Dewatering Press, with 30hp motor and Croft worm gear box. The screws are 230 mm dia. and have a working length of about 2.0 metres. The unit is 4.5 metres long x 1.5 metres to the inlet and 800 mm wide increasing to 1750 mm where side drive is located. Believed to have been rotating at 15 rpm (UCPE 5400) Price - £2,500 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
5401
Twin Screw Press - Rosedowns Twin Screw Dewatering Press, with 20hp motor and Croft worm gear box. The screws are 230 mm dia. and have a working length of about 2.0 metres. Stainless steel mesh lining about 6 mm at start and about 3 mm over most of working length. The unit is 4.5 metres long x 1.5 metres to the inlet and 800 mm wide increasing to 1750 mm where side drive is located. Believed to have been rotating at 10 rpm (UCPE 5401) Price - £3,500 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Twin Screw Press - Stord 64 Twin Screw Dewatering Press, no gearbox (UCPE 5406) Price - £14,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
5516
U Trough Screw - 250 mm dia. U Trough Screw Conveyor, 2.1 metres long with drive (UCPE 5516) Price - £450 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Grain Driers/ Burners - Nu Way Burner, 12.5 Gallon Nozzles fitted. Removed from 40tph dryer (2 remaining) (UCPE 5536) Price - £300 each Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Oil Extraction Press - Rosedown Oil Extraction Screw Press, with 4 stage cooker and 30kW main drive and 11kW cooker drive. Rated at 12 tonnes/day (UCPE 5707) Price - £8,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Horizontal Pellet Cooler - Swiss Combi Two Deck Moving Bed Pellet Cooler, 10 metres long. Bed width is 1.9 metres and overall body width is 2.3 metres. Height to inlet is 2.13 metres (UCPE 5727) Price - £7,500 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
5734
Chain & Flight - Cimbria Stainless Steel Cased Chain and Flight Conveyor, with swan neck bend and inclined outlet end. The case is 260 mm wide x 345 mm deep and the 240 mm wide chain carries heavy duty plastic flights. The stainless body needs some work. The conveyor is 9.3 metres long. Spare chain and flights available at extra cost (UCPE 4734) Price - £1,500 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
5749
Pellet Press Spares - Unused 6.0mm Die, for Compress 235 pellet press. The die is 110 mm thick and has a 1:20 taper (UCPE 5749) Price - £1,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
5750
Pellet Press Spares - Part worn 6.0mm Die, for a Paladin 1200B HR pellet press. The die is 110 mm thick and has a 1:12 taper. It is 50% worn but reconditioned (UCPE 5750) Price - £800 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
5752
Pellet Press Spares - Part worn 3.0mm Die, for Compress 235 pellet press. The die is 70 mm thick and is 40% worn (UCPE 5752) Price - £750 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
5891
Dryers and Coolers - Wenger extrusion dryer/cooler. The dryer is 12.75M long x 3.5M wide x 4.8M high including support frames. Model - 41001-000 Ser No - 8706-8958. Output 6 - 7 tph on kibble. This unit has a centrifugal fan with 600mm diameter backWard lamina impellor and a vee belt drive. Motor looks like around 55kW. Comes with a stainless steel cyclone with rotary valve and a quantity of stainless steel ducting and bends. (UCPE 5891) Price - £50,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
5980
Hammer Mill - 40kW Swing Beater Hammermill, believed to be by Peat Drewery. On base with direct drive, gravity discharge, no feeder (UCPE 5980) Price - £1,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6078
Tank - Jacketed Stainless Steel Tank, 1.2M outside dia. with conical base and 40mm outlet. Insulated top with 400 mm dia. inlet with lid. No support frame or legs. The body is 600 mm deep and the cone is about 400 mm deep (UCPE 6078) Price - £650 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6110
Tray Feeder - Stainless Steel Tray Feeder, 450 mm wide x 2.5 metres long with mild steel base but no drive. The tray is detached from the base but mountings are attached (UCPE 6110) Price - £600 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6145
Oil Extraction Press - Complete Oil Seed Rape Extraction Plant, built with new machines in 2007 and closed in 2010. The oil was going into the biofuel industry not for human consumption. The plant is still in situ and can be viewed by arrangement. The plant output was up to 10,000 litres in a 12 hour shift when processing cleaned oil seed rape at about 30 deg C with an oil content of about 46%. The seed was preheated to around 30 deg C via heat exchangers which were taking heat from the screw presses. The plant has 7 No Strahle SK130/3 screw presses with 7.5kW geared drives mounted on a platform above a large flat bottomed oil tank. The plant includes a 60 tonne rape seed silo and a smaller hopper. There is a small drum cleaner and a cable and disk conveyor that moves the seed around the plant. Two heat exchangers produce hot air that is blown into the rape seed hopper to preheat it before going to the screw presses. An Amafilter model 42-230MS-32 filters the oil before it is pumped to two 100,000 litre tanks. The residual rape seed cake is conveyed to storage and ends up as animal feed. The price includes dismantling and loading to buyers transport. Apart from the tanks the plant will fit in two curtain-siders. The tanks are not included in the offer (UCPE 6145) Price - £100,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6162
Rotary Valve - Cast Steel Rotary Valve, with geared drive. 600mm rotor dia. x 500mm wide (UCPE 6162) Price - £1,500 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Single Pass - Complete Rotary Drum Drying Plant, the single pass drum is 1.5 metres dia. x 8.5 metres long with riding rings, trunnions, chain drive, lagging and cladding. The drum is connected to a steel cased furnace tube with a diesel burner with 3kW combustion fan and an output up to 1900kW thermal. A portable chain and flight conveyor feeds material into the dryer. The dry product is aspirated from the drum via a primary cyclone with a discharge rotary valve and a centrifugal fan on the clean air side. The fan exhausts to atmosphere. The rotary valve on the primary cyclone drops the dry material into a closed loop pneumatic transfer system that delivers the product to a silo via a secondary cyclone with discharge rotary valve. The clean air from the cyclone passes back to the fan inlet. The silo is 3.0 metres dia. x about 4.5 metres high with a flat bottom and sweep arm discharge 1.5 metres above base level. The silo's working volume is about 20 cubic meters. There is an inclined screw conveyor from the silo outlet with a discharge height of about 2 metres. All control equipment is included. I estimate that the evaporative capacity is up to 1.5tph. The drum and furnace are covered by an open sided building which can be purchased at extra cost. The buyer dismantles and removes the plant (UCPE 6164) Price - £30,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6208
U Trough Screw - 150mm dia. U Trough Screw Conveyor, 4.5M long with drive and end outlet (UCPE 6208) Price - £750 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
U Trough Screw - 350mm dia. U Trough Screw Conveyor, 14.5M long with drive, an intermediate electro pneumatic outlet slide and an end outlet. (UCPE 6213) Price - £5,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6248
Pellet Press Spares - Selection of New and Used Dies, prices on application (UCPE 6248) Price - POA Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6250
Pellet Press - Orbit 175 Pellet Press Package, including:- one unit complete with conditioner and starter panel believed to be in good working order. It has a 45kW drive motor. A second unit has a 45kW drive, starter panel but no conditioner. This is suitable for spares or a major rebuild. There are a number of spare dies included (UCPE 6250) Price - £10,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6252
Oil Extraction Press - Strahle SK 132M/4 Screw Press, on support stand with 7.5kW drive. Believed to be 2005 vintage. Never been used. (2 remaining) (UCPE 6252) Price - £11,000 each Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Sieve Cleaners - Westrup FB-1500 Single Deck Reciprocating Inclined Deck Grain Cleaner, screen deck is 1500mm x 2700mm and overall dimensions are 1720mm wide x 3040mm long x 1520mm high. It has a 20mm diameter mesh. Drive looks about 2.2kw (UCPE 6254) Price - £2,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Continuous Mixer - Stainless Steel Mixing Screw, approx. 500mm dia. x 3.47m long, with 7.5kw drive. Shaft speed is about 70rpm. Mixing is by paddles which can be adjusted to increase or decrease the dwell time. It is believed to have been used as a wetting screw for grain in a flour mill. There is a small hole in the case (UCPE 6256) Price - £8,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6257
Continuous Mixer - 320mm dia. x 3.75m long Mixing Screw, in mild steel, with 4kW drive. It has a ribbon flight for mixing and was used for applying oil to animal feed (UCPE 6257) Price - £2,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6264
Silo - Steel silo with shallow hopper and flat top. 2.4M x 2.4M x 4.58M high overall with supporting legs and 200mm x 200mm outlet slide. The hopper is 1.75M deep and discharge height 1.13M. Working volume about 16M3. (2 remaining) (UCPE 6264) Price - £1000 each Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6265
U Trough Screw - Heavy duty centreless screw with drive unit but no trough. The flight is 430mm diameter with 450mm pitch and 20mm thick. It is one continuous flight 16M long. Requires a steel U trough with abrasion resistant lining (UCPE 6265) Price - £3000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact UCPE@sw.co.uk / 0800 122 3050. All equipment is situated at various locations mainly throughout the UK. All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Chain & Flight - Farmers Friend swan neck chain and flight conveyor 175mm wide with 200mm deep trough. About 12 metres of trough but no drive. (2 remaining) (UCPE 6267) Price - £1250 each Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact UCPE@sw.co.uk / 0800 122 3050. All equipment is situated at various locations mainly throughout the UK. All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
U Trough Screw - U trough screw conveyor 250mm diameter x 12 metres long (UCPE 6273) Price - £3000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact UCPE@sw.co.uk / 0800 122 3050. All equipment is situated at various locations mainly throughout the UK. All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
U Trough Screw - U trough screw conveyor 250mm diameter x 6 metres long (UCPE 6274) Price - £1500 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact UCPE@sw.co.uk / 0800 122 3050. All equipment is situated at various locations mainly throughout the UK. All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6276
Chain & Flight - Swan neck chain and flight conveyor 200mm wide with 340mm deep trough. About 8 metres long with tail inlet, drive and shallow swan neck 2 metres from head (UCPE 6276) Price - £2000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact UCPE@sw.co.uk / 0800 122 3050. All equipment is situated at various locations mainly throughout the UK. All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6278
Chain & Flight - Perry 150mm chain and flight conveyor 5.5 metres long with drive. Poor condition (UCPE 6278) Price - £500 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6282
Belt Feeder - Line of 6 No belt feeders in a supporting framework with small reception hoppers and a discharge belt conveyor below. This was used to volumetrically proportion pet food products on a continuous flow basis (UCPE 6282) Price - £7000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6287
Deawner - Blair deawner 800mm long x 350mm wide x 400mm high with fabricated under hopper. Overall height 1016mm. Fingers are worn but functional. Comes with 2.2kw drive (UCPE 6287) Price - £1,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact UCPE@sw.co.uk / 0800 122 3050. All equipment is situated at various locations mainly throughout the UK. All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6288
Deawner - Blair deawner 800mm long x 380mm wide x 400mm high with fabricated under hopper. Overall height 1118mm. Fingers are worn but functional. Comes with 2.2kw drive. (UCPE 6288) Price - £1,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact UCPE@sw.co.uk / 0800 122 3050. All equipment is situated at various locations mainly throughout the UK. All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6291
Rotary Drum Dryer - Swiss Combi MK5 drying drum with two spare riding rings, fan, cyclone and some ducting. No furnace. The cyclone needs some repair work due to fire damage. (UCPE 6291) Price - £15,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact UCPE@sw.co.uk / 0800 122 3050. All equipment is situated at various locations mainly throughout the UK. All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Screw Press - Moret model SH82 dewatering screw with 90kw drive. This was refurbished around 2008. (UCPE-6293) Price £5,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)*** Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact UCPE@sw.co.uk / 0800 122 3050. All equipment is situated at various locations mainly throughout the UK. All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6294
Srew Conveyor - 350mm diameter U trough screw conveyor 5.5 metres long with 10mm thick flights and 178mm pitch. It is jacketed and was probably steam heated in a previous life. (UCPE 6294) Price - £2,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
Chiller - York YIA HW-5C3/702-50-C-S-C Single-Effect Absorption Chiller (steam and hot water chiller). Serial no. ULVM086484. Built 2009. Shipping weight 9.88T and working weight 13.7T. Capacity is dependent on the temperature it operates at and the availability of that hot water, approx. 1.568MW. (UCPE 6296) Price - £27,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6297
Mixer - Phlauer model AJSP-304-DDBIS twin paddle mixer in stainless steel with pneumatic bomb door discharge. It has two geared drives which look to be about 3kw each. Internal body dimensions 1380 mm x 1520 mm. Working volume estimated to be around 1.25m3. The mixer comes with a support stand, handrails, stairs and small service hopper, about 2m3. (UCPE 6297) Price - £10,000 Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6298
Vibro Sifter - Simon vertical vibro sifter. (2 remaining) (UCPE 6298) Price - £1,000 each Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Featured lot
Provisionally sold
Leading
Won
Outbid
Lost
Declined
Reserve not met
Leading
6300
Silos - Isala glass reinforced plastic silo with steel support frame. Silo is 2.0 metres diameter with 4.8 metre vertical and 2.0 metre deep hopper. 300m diameter outlet 700mm above base level. Working volume about 15m3. (3 remaining) (UCPE 6300) Price - £2000 each Please read the following important notes:- ***Overseas buyers - All lots are sold Ex Works (EXW)***
Equipment offered for sale by private negotiation. All offers subject to VAT (where appropriate). For all enquiries please contact
UCPE@sw.co.uk / 0800 122 3050.
All equipment is situated at various locations mainly throughout the UK.
All lots are sold as seen and where lying. All lots are sold as seen and where lying and can be viewed by arrangement.
Please review and confirm your bid
Current bid:
Opening bid:
Your max bid:
Max bid:
Quantity:
Bidding ends:
Your bid is off increment
Choose one of the quick bid options below:
Your bid is below the current minimum bid
To place a bid select the minimum amount below:
Bidding has ended on this item
We are always adding new lots, use search to find similar items.
You are the current highest bidder!
To be sure to win, come back before the lot closes or increase your maximum bid.
You have been outbid!
For a chance of winning, increase your maximum bid.
You have been outbid!
Another bidder has already bid this amount. For a chance of winning, increase your maximum bid.
You have won!
Congratulations!
You are the winning bidder on this lot.
You have lost!
Unfortunately you have missed out on this lot.
Unable to place your bid
Please refresh your page to see current lot status.
We're very sorry, but we were unable to process the Buy it now.
Please contact customer services for more help.
Your bid has been declined
Your bid has been declined by the auctioneer, please contact customer services for more information.
Your bid is pending approval with the auctioneer
Please check your email account for more details.
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer
Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.
Please review and confirm your bid
Current bid:
Opening bid:
Your max bid:
Max bid:
Buy it now price:
As your Max bid is at least equal to the Buy it now price, you can immediately purchase the lot.
New bid:
Quantity:
Bidding ends:
Your bid is off increment
Choose one of the quick bid options below:
Your bid is below the current minimum bid
To place a bid select the minimum amount below:
Bidding has ended on this item
We are always adding new lots, use search to find similar items.
You are the current highest bidder!
To be sure to win, come back before the lot closes or increase your maximum bid.
You have been outbid!
For a chance of winning, increase your maximum bid.
You have been outbid!
Another bidder has already bid this amount. For a chance of winning, increase your maximum bid.
You have won!
Congratulations!
You are the winning bidder on this lot.
You have lost!
Unfortunately you have missed out on this lot.
Unable to place your bid
Please refresh your page to see current lot status.
We're very sorry, but we were unable to process the Buy it now.
Please contact customer services for more help.
Your bid has been declined
Your bid has been declined by the auctioneer, please contact customer services for more information.
Your bid is pending approval with the auctioneer
Please check your email account for more details.
You cannot Buy it now until you are approved to bid.
Please contact the auctioneer
Confirming your bid is a legally binding obligation to purchase and pay for the lot should your bid be successful.